Lock Hinge Industrilas 2651-430032, compact, polyamide, 85x91 mm, 180°, black

The lock hinge Industrilas 2651-430032 is a modern industrial hardware product for insulated and sealed doors. It belongs to the Klima-Flex™ series of solutions for heating, ventilation and air conditioning (HVAC) systems.

Application of lockable hinges

• For hermetically sealed spaces in HVAC systems.
• Particularly useful in areas where access is difficult and the technical door cannot be fully opened. In this case, the installation of the products makes it possible not just to open the door, but to dismantle it completely so that maintenance can be carried out without difficulty.

Features of the latch handle lock

• When using the products as latches on one side only, the door will open to the left or right side.
• When using products as latches on both sides, the door can be dismantled.
• Before opening the door of the chamber to be serviced, it is necessary to relieve the overpressure in the chamber cavity. To do this, lift the latch handle and wait for a while, the air will escape with a slight noise. Only then can the door be opened or dismantled.
• To achieve maximum effect, the products should be installed symmetrically in each corner of the door, i.e. at least 4 pieces per door.
• The hinge mechanism of the hinge lock can be moved relative to its body, which facilitates installation. This enables the product to be moved along the z-axis by 1-3 mm.

Advantages of the hinge-lock

• One product can be used both as a lock and a hinge due to its special design.
• A key is not required when operating as a lock with restricted access for maintenance personnel. Secure locking is ensured by the lock's design as a latch.
• Provides tight closing of the door due to internal compression.
• Can be installed on doors made of metal sheet of any thickness: from thin to thick.
• Provides convenient installation by adjusting the movement in three dimensions.

Characteristics of Industrilas 2651-430032

Material

   insert, handle, body - polyamide, spring - stainless steel 14310.

   Insert type: recessed hexagon.

Hinge hinge: not removable.

Dimentions: 85x91x30,5 mm.

Opening angle: 180°.

Compression: internal 3-6 mm.

Vertical offset: 0 mm.

Conformity to standards:

   vibration resistance according to DIN EN 61373,

   tightness according to DIN EN 1886, level L1

Complete

Without key, without mounting plate.

Available as an option for this product (to order):

• different types of inserts: cylindrical English key, butterfly, square, triangle;
• metal mounting plate. It is used to reinforce the mounting point in case of a metal door made of thin sheet metal (0.65 mm). It allows you to save on the cost of the door by reducing its thickness, but at the same time to ensure tightness of its closing;
• hexagon key. Provides additional locking, if necessary.

Buy lock hinge wholesale at the best price you can on our site. Place an order online. We will carry out delivery to Europe.