Splicing sleeve RZ TL-WS21, dia. 2.7 mm/3.3 mm, under solder, red

Splice sleeve RZ TL-WS21, solder, red, used for connecting copper stranded wires of the same or different diameters.

Where are sleeves for splice wires used?

They are ordered by auto repair shops, manufacturing plants, assembly shops. And also those who are engaged in the maintenance of electrical equipment. 

Each insulated sleeve can withstand: 

•  Voltage up to 690 V. 
•  Temperature up to +125 ° С. But performance is maintained down to -50 ° C. 
•  Exposure to moisture and solvents. This increases the protection of the connection. 

The insulated connection sleeve can be used in unheated rooms near heated equipment. It is required in the process of repairing electrical wiring of cars, machine tools, cars. 

How to use crimp connectors? 

A sleeve is put on one of the wires to be connected. After that, the contacts are cleaned and fluffed. They are connected so that the ends go into each other with veins. The wire crimp connector then moves to the connection point. Make sure the pins are in the solder ring. 

For the next step, you will need a gas torch or hairdryer. Warm up the solder evenly until it melts. And then the rest of the sleeve, moving from the center. When the adhesive is melted, it will securely seal the soldered area.

Splice sleeve advantages

• Seal the joint. 
• No weak spot during installation.
• When checking for rupture, the destruction of the wire occurs outside the sleeve. 

Characteristics of RZ TL-WS21

Where is it profitable to shop? 

Do you need a splice sleeve in bulk in Ukraine? Order it from Osnova-Market. We have: 

•  original products; 
•  affordable price;
•  prompt delivery.

We offer tin heat shrink tubings for different sizes of wires.

Packaging

P/E packaging, 100 pcs. Delivery of goods only in packs.

In order to calculate the price correctly, please specify the quantity in multiples of 100 when ordering the product.