x
Submit an application
  • Heat shrink sleeve RZ TL-WS11, dia. 2.7 mm/3.3 mm, with solder, white

Heat shrink sleeve RZ TL-WS11, dia. 2.7 mm/3.3 mm, with solder, white

Product code: RZ TL-WS11
In Stock
7.15 UAH
Price for 1 piece
  • Minimal order quantity 100 pcs
    Quantity: 18870
    Delivery
    Self service
    8:00 - 17:00 (Kyiv)
    Free of charge
    Sending by DHL
    Same day ship out if order placed until 15:00 (Kyiv)
    From 10.99 €
    Payment
    Card payment
    Guarantee
    Exchange / Return of the Goods within 7 days
    The seller guarantees the packaging of the ordered product, which will ensure the integrity and safety of its commercial type.
    Characteristics
    Manufacturer RZ
    Country of manufacture China

    The heat shrink tubing RZ TL-WS11, with solder, white, used for connecting copper-stranded wires of the same or different diameters.

    Where are heat shrink sleeves used?

    Auto repair shops, manufacturing plants, assembly shops. And also those who are engaged in the maintenance of electrical equipment. 

    Each insulated sleeve can withstand: 

    •  Voltage up to 690 V. 
    •  Temperature up to +125 ° С. But performance is maintained down to -50 ° C. 
    •  Exposure to moisture and solvents. This increases the protection of the connection.

    The insulated connection sleeve can be used in unheated rooms near heated equipment. It is required in the process of repairing electrical wiring of cars, machine tools, cars. 

    How to use crimp connectors? 

    A sleeve is put on one of the wires to be connected. After that, the contacts are cleaned and fluffed. They are connected so that the ends go into each other with veins. The wire crimp connector then moves to the connection point. Make sure the pins are in the solder ring. 

    For the next step, you will need a gas torch or hairdryer. Warm up the solder evenly until it melts. And then the rest of the sleeve, moving from the center. When the adhesive is melted, it will securely seal the soldered area.

    Solder sleeve advantages

    • Seal the joint. 
    • No weak spot during installation.
    • When checking for rupture, the destruction of the wire occurs outside the sleeve. 

    Characteristics 

    Article
    L, mm
    A1, mm
    A2, mm
    B1, mm
     B2, mm
    Color
    TL-WS11
    272,73,3<2,7
    <3,3
    White 

    Where is it profitable to shop? 

    Do you need a heat-shrinkable sleeve RZ TL-WS11 heat shrink sleeve in bulk in Ukraine? Order it from Osnova-Market. We have: 

    •  original products; 
    •  affordable price; 
    •  prompt delivery.

          Packaging

          P/E packaging, 100 pcs. Delivery of goods only in packs.

          In order to calculate the price correctly, please specify the quantity in multiples of 100 when ordering the product.

          Write a review

          Note. HTML markup is not supported! Use plain text.
              Bad           Good
          Heat shrink sleeve RZ TL-WS11, dia. 2.7 mm/3.3 mm, with solder, white
          Heat shrink sleeve RZ TL-WS11, dia. 2.7 mm/3.3 mm, with solder, white
          7.15 UAH
          Minimal order quantity 100 pcs
          In Stock

          Recently watched

          Heat shrink sleeve RZ TL-WS11, dia. 2.7 mm/3.3 mm, with solder, white
          Code RZ TL-WS11
          In Stock
          7.15 UAH
          Minimal order quantity 100
          Quantity 18870
          The heat shrink tubing RZ TL-WS11, with solder, white, used for connecting copper-stranded wires of ..
          7.15 UAH
          Minimal order quantity 100
          The heat shrink tubing RZ TL-WS11, with solder, white, used for connecting copper-stranded wires of ..